Whats on your work bench?

Rollin Hand · Sat Jun 15, 2024 9:47 am

deeaa wrote: ↑Sat Jun 15, 2024 12:15 am While preparing to refinish a guitar of mine I noticed it had cracked badly at the body both sides of the neck.

I don't know whether it'll be fine really...I drilled 4 small holes deep in the crack and injected Titebond, and clamped it. Soon will open and see if it worked.

It may have been cracked for a while already...the strings on it pulls the crack shut so I only noticed it when I was spraying on the first layer of base coat filler.

Sent from my M2103K19G using Tapatalk

Generally a glued bond is stronger than the wood around it. I am sure you'll be OK.

deeaa · Sat Jun 15, 2024 9:50 am

Yeah, seems solid now. Just gave it the first coat of filler spray, then final sand and final filler and tomorrow I can color it - white this time.

mozz · Sat Jul 06, 2024 5:19 pm

Geeze Ali express, what has happened to your quality control?

Rollin Hand · Thu Jul 11, 2024 7:31 pm

Did some work on the Flame guitar this week. Once the tuner was unstuck, I changed the strings and adjusted the trem springs to have more tension -- with three springs, they barely stayed in if I pulled up on the bar.

I also move the ground wire from one of the spring hooks to the body of the spring claw. Worst soldering job ever! I sanded the spot and used flux, but it gave me trouble right up until it didn't.

I also put in black pickup ring screws, and my usual stainless neck screws.

Remaining items: the pot moves a little bit, so I need to sort that, and the intonation is so far off it's a couple of streets south of where I live. Always a treat on a Floyd, but will hopefully be worth the work. She stays in tune perfectly.

And I might be developing a taste for having the last 4 frets scalloped. It makes everything easier in the weedly section of the board..

mozz · Sun Jul 21, 2024 6:04 pm

Vinyl wrap spray paint does not like to be sanded. Ah, here's a nice color, creme sickle. Having fun painting these Muslady bodies from Ali express. Wood is very light, hope they don't neck dive.

TVvoodoo · Sat Jul 27, 2024 6:28 pm

You know how all the kids are wearing priest and sabbath shirts ironically?
Soon some of us GenXers and boomers will be able to fight back

mozz · Thu Sep 19, 2024 6:57 am

Made this one quick.
Small amps were at one time intercoms. Got 3 of them to mod. Widow maker style with a isolation transformer on the back. 3 watts on a good day, 4" speaker inside. Gutted and made into a Magnatone . I bet these will sell to harmonica players.

voodoorat · Thu Nov 14, 2024 5:28 pm

Put a tiny little kill switch in the Zach Myer PRS SE. For the moment it just replaced the bridge tone but I think I want to i move it to the bridge volume (PRE) spot and modify the neck tone to be a master tone and either put it where the button is now and maybe move the bridge volume to the Gibson spot

To switch to master tone is easiest to just disconnect from neck volume pot and hook live from switch to live on button?

Sent from my iPhone using Tapatalk

Thu Nov 14, 2024 7:33 pm

voodoorat wrote: ↑Thu Nov 14, 2024 5:28 pm Put a tiny little kill switch in the Zach Myer PRS SE. For the moment it just replaced the bridge tone but I think I want to i move it to the bridge volume (PRE) spot and modify the neck tone to be a master tone and either put it where the button is now and maybe move the bridge volume to the Gibson spot

To switch to master tone is easiest to just disconnect from neck volume pot and hook live from switch to live on button?

Sent from my iPhone using Tapatalk

I've never seen it done with that feature but wouldn't a push/pull (or even better, a push/push) pot work as well and eliminate the need for drilling a hole?

voodoorat · Fri Nov 15, 2024 6:53 pm

tobijohn wrote: ↑Thu Nov 14, 2024 7:33 pm
voodoorat wrote: ↑Thu Nov 14, 2024 5:28 pm Put a tiny little kill switch in the Zach Myer PRS SE. For the moment it just replaced the bridge tone but I think I want to i move it to the bridge volume (PRE) spot and modify the neck tone to be a master tone and either put it where the button is now and maybe move the bridge volume to the Gibson spot

To switch to master tone is easiest to just disconnect from neck volume pot and hook live from switch to live on button?

Sent from my iPhone using Tapatalk
I've never seen it done with that feature but wouldn't a push/pull (or even better, a push/push) pot work as well and eliminate the need for drilling a hole?

sorry no new holes--i swapped the bridge tone out for the button (they are in weird positions on prs guitars) and i want to modify the other (neck) tone to be a master tone. i also want to rearrange the knobs to be a little more ergonomic, where the two volumes are like they are on les pauls and the master tone is where that button is and the button is where the bridge volume currently is (close to and behind the bridge). i am not sure how to orchestrate a master tone but it seems like it should be easy enough.

the other tone pot is sitting in a box with the knob, etc, don't really need it if i have a master tone.

Fri Nov 15, 2024 9:45 pm

Whoops, misread your post, sorry. The Explorer and V have that configuration. Here's a diagram from Guitar Electronics:

voodoorat · Sun Nov 17, 2024 9:18 am

tobijohn wrote:Whoops, misread your post, sorry. The Explorer and V have that configuration. Here's a diagram from Guitar Electronics:

Okay good that’s pretty much how I figured it, should be easy enough whenever my motivation overcomes my inherent laziness. Thanks!

Sent from my iPhone using Tapatalk

voodoorat · Wed Nov 20, 2024 1:44 pm

tobijohn wrote:Whoops, misread your post, sorry. The Explorer and V have that configuration. Here's a diagram from Guitar Electronics:

Done!

I moved the two volume pots to the same spot they are on Les Paul’s, converted the other pot to a master tone and moved it to the furthest back hole, and moved the kill switch button to the position closer to the bridge. Looks pretty much the same but it’s better now.

Sent from my iPhone using Tapatalk