It's a one owner, still mint AGILE AL-3010SE OCEANBURST FLAME DAMN WIDE (the model can be seen advertised on the Rondo site at https://www.rondomusic.com/Agile_AL-301 ... lm_DM.html).
A few of the specs as measured on my example are a bit different from those published, so I'm listing them here for any that might find those small variances to be of interest...
Overall length: 40"
Scale length: 24-3/4"
Body thickness at the edge: 1-15/16"
Width at the upper bout: 9-1/4"
Width at the lower bout: 13-5/16"
Neck taper/thickness at the 1st fret: 3/4" (19.5 mm)
Neck taper/thickness at the 12th fret: 7/8" (21.5 mm)
Spacing between the strings at the nut: 1/4" (7.5 mm)
Overall string spacing at the nut: 1-9/16" (39.7 mm)
Spacing between the strings at the bridge: 3/8" (10 mm)
Overall string spacing at the bridge: 2" (52.5 mm)
Width of the neck at the nut: 1-7/8" (47 mm)
Width of the neck at the 12th fret: 2-1/8" (54 mm)
Width of the neck at the 21st fret: 2-3/16" (56 mm)
Neck radius: 13.7" (350 mm)
Weight: 9.3 pounds
It's an MIK originally purchased just a few months ago, and was built with a center-seamed 2 piece body (that even has some flame in the mahogany back), and what I'm pretty sure is a 3 piece (!) neck. It's solid as a rock, and my heaviest guitar (NOTE: reweighed it several times on different scales, consistently comes in at 9 lb even -- guess the seller's scale wasn't 100% accurate). There may be a maple cap beneath the flamed top veneer; I saw a horizontal seam around the upper portion of both pickup cavities' interior, but did not want to scrape away the shielding paint to see more -- no such seam or join, however, can be seen below the binding anywhere around the perimeter of the body, so maybe not. The seller fitted those knurled Telecaster-style knobs, and I think I'll keep 'em on (for the moment)!
Lucky for me, this baby's a got a lot of Seafoam Green in it (which I love), unlike the stock pic of the model, which photographed as straight up blue...
Click pics to embiggen!
.