Needless to say, I jumped at the opportunity to play this vintage instrument. Realizing I might never have another chance to have one of these in my possession, I decided to make a short video.
SO MY NEIGHBOR ASKS IF I'D RESTRING HIS 60s GIBSON ES-120T . . .
- toomanycats
- Reactions:
- Posts: 1883
- Joined: Wed May 27, 2020 7:43 pm
“There are only two means of refuge from the miseries of life: Music and Cats!” Albert Schweitzer
- tonebender
- Reactions:
- Posts: 1503
- Joined: Sun May 31, 2020 8:39 am
- Location: Wheremyhathangs, FL
- Gearlist: Fav: Gibson LP and Gibson Goldtone Amp. Other gear: Gretsch, Peavey, Taylor and more.
Very nice guitar!
"Will follow through with a transaction when the terms are agreed upon" almightybunghole
- andrewsrea
- Reactions:
- Posts: 1362
- Joined: Wed May 27, 2020 4:43 pm
- Location: Lake Saint Louis, MO
- Gearlist: 28 Guitars: (2) basses, (2) acoustics, (3) hollow bodies, (3) Semi hollow, (1) Double-neck, (17) Solid-bodies
Great video and nice guitar. The resonance and the necks are an indescribable treat, but then again, I am biased as it is the type of guitar I grew up on.
Smart to be ginger with those Baklite tuner buttons -the crumble like you explained. I still have teh originals on my ES-125 (full 3.5" depth) that I've pinned down to being a 1949 to 1951 model:
Smart to be ginger with those Baklite tuner buttons -the crumble like you explained. I still have teh originals on my ES-125 (full 3.5" depth) that I've pinned down to being a 1949 to 1951 model:
Live life to the fullest! - Rob
- toomanycats
- Reactions:
- Posts: 1883
- Joined: Wed May 27, 2020 7:43 pm
Like I said in the video, I was expecting to see a P90 on my neighbors guitar and was surprised when I opened the case and saw the single coil. Do you know anything about the single coil neck pickup on the ES-120T? Is it designed like a fender single coil with rod magnets, or is there a bar magnet underneath?andrewsrea wrote: ↑Sat Oct 21, 2023 10:34 am Great video and nice guitar. The resonance and the necks are an indescribable treat, but then again, I am biased as it is the type of guitar I grew up on.
Smart to be ginger with those Baklite tuner buttons -the crumble like you explained. I still have teh originals on my ES-125 (full 3.5" depth) that I've pinned down to being a 1949 to 1951 model:
20190127_114230.jpg
I can't believe what good condition your ES-125 is in. I love the pickguard.
“There are only two means of refuge from the miseries of life: Music and Cats!” Albert Schweitzer
- andrewsrea
- Reactions:
- Posts: 1362
- Joined: Wed May 27, 2020 4:43 pm
- Location: Lake Saint Louis, MO
- Gearlist: 28 Guitars: (2) basses, (2) acoustics, (3) hollow bodies, (3) Semi hollow, (1) Double-neck, (17) Solid-bodies
My Dad bought the ES125 NOS in early 1951 with a Champ type amp Alimo amp, from the inventory of a Philadelphia string band. He took great care of it as have I, when he gave it to me. The PG is Bakalite and has shrunk, but thankfully has not cracked as they do. The tuner buttons are visibly dried out and fragile. I am thinking of replacing them, just to reduce the likely hood of them breakingtoomanycats wrote: ↑Sat Oct 21, 2023 10:48 am
Do you know anything about the single coil neck pickup on the ES-120T? Is it designed like a fender single coil with rod magnets, or is there a bar magnet underneath?
I can't believe what good condition your ES-125 is in. I love the pickguard.
I am pretty sure the PU in your guitar is a PU380, which is essentially like one bobbin of a Firebird with the bar magnet running in the center - but the bobbin is bigger to hold more windings. Where a FB pickup is two bobbins with a center magnet and wound to approximately 4.7K each, the PU380 is wound to about 7K. Most notably found in the Gibson Melody Maker and laet 60's juniors, but in many of the Kalamazoo line and in Gibson's pedal steels.
Live life to the fullest! - Rob
- toomanycats
- Reactions:
- Posts: 1883
- Joined: Wed May 27, 2020 7:43 pm
Thanks. I knew that you'd know what that pickup was.andrewsrea wrote: ↑Sun Oct 22, 2023 12:21 pmMy Dad bought the ES125 NOS in early 1951 with a Champ type amp Alimo amp, from the inventory of a Philadelphia string band. He took great care of it as have I, when he gave it to me. The PG is Bakalite and has shrunk, but thankfully has not cracked as they do. The tuner buttons are visibly dried out and fragile. I am thinking of replacing them, just to reduce the likely hood of them breakingtoomanycats wrote: ↑Sat Oct 21, 2023 10:48 am
Do you know anything about the single coil neck pickup on the ES-120T? Is it designed like a fender single coil with rod magnets, or is there a bar magnet underneath?
I can't believe what good condition your ES-125 is in. I love the pickguard.
I am pretty sure the PU in your guitar is a PU380, which is essentially like one bobbin of a Firebird with the bar magnet running in the center - but the bobbin is bigger to hold more windings. Where a FB pickup is two bobbins with a center magnet and wound to approximately 4.7K each, the PU380 is wound to about 7K. Most notably found in the Gibson Melody Maker and laet 60's juniors, but in many of the Kalamazoo line and in Gibson's pedal steels.
“There are only two means of refuge from the miseries of life: Music and Cats!” Albert Schweitzer
- tonebender
- Reactions:
- Posts: 1503
- Joined: Sun May 31, 2020 8:39 am
- Location: Wheremyhathangs, FL
- Gearlist: Fav: Gibson LP and Gibson Goldtone Amp. Other gear: Gretsch, Peavey, Taylor and more.
When you spoke about it being to a 335 what a LP Jr is to a Les Paul, it just reminded me of how much I love my Junior. The last 4-5 gigs I have played nothing but the Junior. I am trying real hard not to conclude I like it better than my Goldtop but I am finding it to be difficult. My Goldtop is my favorite all time guitar.
"Will follow through with a transaction when the terms are agreed upon" almightybunghole
- LightWingStudios
- Site Admin
- Reactions:
- Posts: 1018
- Joined: Wed May 27, 2020 11:34 am
- Location: Titusville, FL U.S. of A.
- Contact:
Incredible! Thank for posting this.toomanycats wrote: ↑Fri Oct 20, 2023 1:26 pm Needless to say, I jumped at the opportunity to play this vintage instrument. Realizing I might never have another chance to have one of these in my possession, I decided to make a short video.
U.S. Manufacturer Of Musical Instrument Protection Accessories: AxeShield HD, AxeSak HD, AmpShield HD, KeyShield HD, PedalShield HD, MixShield HD, AxeGlove And AxeCap.
Visit Us At https://www.LightWingStudios.com
Email us at contact@LightWingStudios.com
Visit Us At https://www.LightWingStudios.com
Email us at contact@LightWingStudios.com