My LINE 6 amp came a couple of weeks ago and my Harley Benton Tele came a few days ago they were my birthday present to myself. I love both of them the amp works really well for my indoor needs. The drum loops work well and it has the ability to record a loop on it like a rhythm guitar loop then just play all the melody lines you wish over it. When I plug in my headphones I can crank it up because these old farts that live in my apartment complex can't hear a thing.
The new Tele was a great choice it was very playable out of the box but I did set it up to my liking and the tuning machines are not much some are very stiff and some are just loose so I need to change them out but no other problem even the nut was cut very well and needs no attention the pups sound fine to my ear it is however heavy at 9.6 pounds. So a few bucks for machines and a set of new strings and I'm all set Thanks for the suggestions everyone gave me when I was searching.
NG and AD A LITTLE LATE
-
redman
- Reactions:
- Posts: 783
- Joined: Wed May 27, 2020 3:22 pm
- Location: Asheville, NC
- Gearlist: Gibson LP, Agile PS900, SX Tele, SX Strat, PRS SE Zach Myers Yamaha FGX830c, Yamaha LL16, Yamaha LL26, Eastman E10D, Tobias Bass, Squire CV 60's P Bass
You do not have the required permissions to view the files attached to this post.
-
sabasgr68
- Reactions:
- Posts: 1568
- Joined: Wed May 27, 2020 10:11 pm
- Location: Venezuela, Caracas
- Gearlist: Mossman Sunking Strat (model MN001) - Zoom G3xn - My hands
- Contact:
That Tele looks great! HNGD, congrats x 3.
Enjoy them all!
PS: What about the clean tones of the Line 6?
Enjoy them all!
PS: What about the clean tones of the Line 6?
I´m the guy from Venezuela (Not Communist/Socialist) - Catholic - Husband - Father
Looking for online/remote job - Income on the internet
Always grateful to the AGF community and friends
AGF refugee - Banned by MOMO
Looking for online/remote job - Income on the internet
Always grateful to the AGF community and friends
AGF refugee - Banned by MOMO
-
honyock
- Reactions:
- Posts: 980
- Joined: Wed May 27, 2020 2:27 pm
That looks like a winning combo for sure.
I really regret not getting one of the cabronita style ones when they were cheaper and shipping was flat rate.
I really regret not getting one of the cabronita style ones when they were cheaper and shipping was flat rate.
10 years, 2 months, and 8 days of blissful ignorance ruined by that snake in the grass Major Tom.
-
redman
- Reactions:
- Posts: 783
- Joined: Wed May 27, 2020 3:22 pm
- Location: Asheville, NC
- Gearlist: Gibson LP, Agile PS900, SX Tele, SX Strat, PRS SE Zach Myers Yamaha FGX830c, Yamaha LL16, Yamaha LL26, Eastman E10D, Tobias Bass, Squire CV 60's P Bass
Thanks guys sorry it took so long to get back to this thread I got laid up in the hospital for a couple of weeks again.
@sabasgr68 there are only two truly clean on the preset effects the others have reverb or delay or both but they sound good however it is primarily practice amp but could cover a gig in a small room or it sounds good enough to mic or run through the PA to cover any size room.
@aullucci it's a TE-52 NA Vintage Series I really like it's just darn heavy but even so with shipping it came in under $200 and for the quality IMO it's worth every penny and then some.
@sabasgr68 there are only two truly clean on the preset effects the others have reverb or delay or both but they sound good however it is primarily practice amp but could cover a gig in a small room or it sounds good enough to mic or run through the PA to cover any size room.
@aullucci it's a TE-52 NA Vintage Series I really like it's just darn heavy but even so with shipping it came in under $200 and for the quality IMO it's worth every penny and then some.
-
aullucci
- Reactions:
- Posts: 343
- Joined: Wed May 27, 2020 2:17 pm
- Location: Lil Rhody
I've almost bought that guitar a couple of times. Nice choice. Hope you're on the mend...
-
nomadh
- Reactions:
- Posts: 1781
- Joined: Wed May 27, 2020 1:32 pm
- Gearlist: My Gear:Electric
Gibson '13 studio dlx hsb
Gibson '79 flying V
Gibson '06 sg faded
Gibson '15 LP CM w gforce
Epiphone Casino coupe
Epiphone dot studio
Fender USA strat w mjt body _w Original body 81
Fender lead II
Firefly spalted 338
Squier affinity tele bsb
Squier strat std relic
Squier subsonic baritone
Agile al2500 albino
Agile al3001 hsb
Sx ash Ltd strat
Sx ash strat short scale
Sx ash tele
Sx callisto jr
Dean vendetta
Washburn firebird. Ps10
Johnson trans red strat
Johnson jazz box Vegas
Seville explorer
Inlaid tele
flametop bigsby tele wood inlaid neck
23
Acoustics
new Eastman acoustic
Sigma dm3 dread x2 (his and hers)
Fender 12 str
Ibanez exotic wood
Silvercreek rosewood 00
Ovation steel str
martin backpacker acoustic
Johnson dobro
Looks great. I am still just a little too worried about returns possibility to buy an HB.
-
tobijohn
- Reactions:
- Posts: 1852
- Joined: Wed May 27, 2020 12:54 pm
- Location: Palm Beach Gardens, FL
If you focus on b-stocks, the odds of one having to go back due to cosmetic or functionality issues are drastically reduced as those are physically inspected before being relisted...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
-
Mossman
- Reactions:
- Posts: 1783
- Joined: Wed May 27, 2020 1:46 pm
Cool beans, man... I think the TE-52 looks and sounds great from what I've heard in review videos, and it gets universally positive reviews. I've come close to buying one on a few occasions, but the weight puts me off.
Hope you're doing ok after your hospital stay.
Hope you're doing ok after your hospital stay.
Finally escaping the People's Republic of Kalifornia!
BANNED BY MOMO
BANNED BY MOMO
-
Mossman
- Reactions:
- Posts: 1783
- Joined: Wed May 27, 2020 1:46 pm
Thanks for reminding me... I keep forgetting they have B-stocks at Thomann.
Finally escaping the People's Republic of Kalifornia!
BANNED BY MOMO
BANNED BY MOMO
-
tobijohn
- Reactions:
- Posts: 1852
- Joined: Wed May 27, 2020 12:54 pm
- Location: Palm Beach Gardens, FL
They'll be back in stock in a week or so which means that in a few more weeks after that, there should be some b-stocks available. I picked one up a few years ago and those Filtertron clones definitely do NOT need to be replaced. Also, about the same time @NickintheStates got one as well, neither of us cared for the reverse headstock so we swapped and the necks fit perfectly. The only issue is the logo is upside down but i plan on sanding it off and reshooting with clear...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
-
sabasgr68
- Reactions:
- Posts: 1568
- Joined: Wed May 27, 2020 10:11 pm
- Location: Venezuela, Caracas
- Gearlist: Mossman Sunking Strat (model MN001) - Zoom G3xn - My hands
- Contact:
That´s good; I hope you are happy with the sounds you´re getting out of it.redman wrote: ↑Tue May 04, 2021 7:08 pm Thanks guys sorry it took so long to get back to this thread I got laid up in the hospital for a couple of weeks again.
@sabasgr68 there are only two truly clean on the preset effects the others have reverb or delay or both but they sound good however it is primarily practice amp but could cover a gig in a small room or it sounds good enough to mic or run through the PA to cover any size room.
@aullucci it's a TE-52 NA Vintage Series I really like it's just darn heavy but even so with shipping it came in under $200 and for the quality IMO it's worth every penny and then some.
And I hope this time was not anything as serious as the last time you were in the hospital, Randy.
Take care...
I´m the guy from Venezuela (Not Communist/Socialist) - Catholic - Husband - Father
Looking for online/remote job - Income on the internet
Always grateful to the AGF community and friends
AGF refugee - Banned by MOMO
Looking for online/remote job - Income on the internet
Always grateful to the AGF community and friends
AGF refugee - Banned by MOMO
-
honyock
- Reactions:
- Posts: 980
- Joined: Wed May 27, 2020 2:27 pm
Well it looks like I'd pay the same price for 2 guitars as 1 so, with my pay bump the new job provided, I may just put my money where my mouth is when that time comes. If there is one of the mustang style B stocks still by that time.tobijohn wrote:They'll be back in stock in a week or so which means that in a few more weeks after that, there should be some b-stocks available. I picked one up a few years ago and those Filtertron clones definitely do NOT need to be replaced. Also, about the same time [mention]NickintheStates[/mention] got one as well, neither of us cared for the reverse headstock so we swapped and the necks fit perfectly. The only issue is the logo is upside down but i plan on sanding it off and reshooting with clear...
I just wish HB would make some of the mid range stuff like the really sexy Explorers. That is just insane.
10 years, 2 months, and 8 days of blissful ignorance ruined by that snake in the grass Major Tom.
-
tobijohn
- Reactions:
- Posts: 1852
- Joined: Wed May 27, 2020 12:54 pm
- Location: Palm Beach Gardens, FL
BTW, how thick is the body on the TE-52?
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
-
BrianSkeezer
- Reactions:
- Posts: 209
- Joined: Wed May 27, 2020 4:36 pm
- Location: Maryland
Mine is a little slimmer than 1-11/16".
-
redman
- Reactions:
- Posts: 783
- Joined: Wed May 27, 2020 3:22 pm
- Location: Asheville, NC
- Gearlist: Gibson LP, Agile PS900, SX Tele, SX Strat, PRS SE Zach Myers Yamaha FGX830c, Yamaha LL16, Yamaha LL26, Eastman E10D, Tobias Bass, Squire CV 60's P Bass
@tobijohn I'm glad you asked that question because I grabbed my calipers and discovered the battery was dead and I didn't have any extras. Anyway I went old school and used a ruler and the answer for mine at least was 1 and 6/10th inches. I've played mine quite a bet and like everything about it (except the weight) I did have to file the nut a bit and lower the action at the bridge didn't have to touch the frets I did roll the fretboard to give it that vintage Fender feel. I'm really glad I joined this forum if I hadn't I would never have known how great some inexpensive guitars are.