One thing I noticed is that this is a tad thinner and lighter than the AD-3200 Blurple that I got from the first batch (the ones that came with the G&B pickups). I would say it is 1/16" thinner. It's enough to notice. The guitar weighs in at about 9.25 lbs. The Giovanni GVH-1 pickups are like the others coming in the Agiles these days. I think they sound pretty damn good in this particular guitar, and even though I already know what I am going to do with modding it, I am in no super big hurry. They will eventually come out though. The finish and binding appear to be flawless.
There are a couple of issues though. One was that the nut was too high, so the strings were way off the fretboard at the first fret. It was ridiculous. It was an easy fix, as I took the nut off and just sanded it down a little. Still, I should not have to do that on a new guitar. The second issue is how wonky this switch cover looks. If you notice there is a big gap in the upper right area and in the lower left the cover is right on the very edge, before the taper of the body starts. So, my question is. Would you consider this to be not a big deal, or would this be a B-stock, worthy of me asking Rondo for a partial refund? I don't want to be too picky here.
