How fixable would a truss rod issue like this be?

Sub forums for Agile/SX, Gibson, Fender, PRS, Epiphone, Douglas, Other guitars and Lessons. If you would like another added contact the Site Admin.
Post Reply
golem
Reactions:
Posts: 983
Joined: Wed May 27, 2020 1:44 pm

Full thread: https://www.thegearpage.net/board/index ... o.2161544/

Relevant snippet:
The neck has a few issues (and I have reduced my original asking price by $400 to reflect that):
The neck plays just fine as it is, but it's fairly close to flat and, while the truss rod seems to work, there's no more adjustment left (i.e it's fully loosened) if it were to move into back bow. It's a 1973 neck so it's been through 47 years of changes and seems really stable..but the possibility is there and it needs to be mentioned and factored into any deal. I put heavier strings on the guitar (12s) which did help a bunch but to really fix it it would need some work. Like I said though, it plays great with decent relief as it is (no fret buzz, stopping out or anything).
Being that I live in super-dry Arizona, there is a little fret-sprout along the neck (minor) which almost always clears up whenever I send a guitar to a more normal climate. I have reduced my asking price to account for that as well.
User avatar
mozz
Reactions:
Posts: 1117
Joined: Wed May 27, 2020 1:37 pm
Location: NE-PA.

Refinished, refretted. Fret problems sprouting. Doesn't sound like it was done properly. I'd pass.

edit, i dont know how the truss rods were back then, maybe just 1 way instead of dual acting? Could be snapped. What's it worth in 100%? You could always put a new neck on it, even from stratosphere. They could rip the fretboard off and install a new truss rod.
AGF refugee
User avatar
Flatline
Reactions:
Posts: 331
Joined: Wed May 27, 2020 4:38 pm
Location: Indiana

$2000 with those issues? hard pass!
User avatar
nomadh
Reactions:
Posts: 1745
Joined: Wed May 27, 2020 1:32 pm
Gearlist: My Gear:Electric
Gibson '13 studio dlx hsb
Gibson '79 flying V
Gibson '06 sg faded
Gibson '15 LP CM w gforce
Epiphone Casino coupe
Epiphone dot studio
Fender USA strat w mjt body _w Original body 81
Fender lead II
Firefly spalted 338
Squier affinity tele bsb
Squier strat std relic
Squier subsonic baritone
Agile al2500 albino
Agile al3001 hsb
Sx ash Ltd strat
Sx ash strat short scale
Sx ash tele
Sx callisto jr
Dean vendetta
Washburn firebird. Ps10
Johnson trans red strat
Johnson jazz box Vegas
Seville explorer
Inlaid tele
flametop bigsby tele wood inlaid neck
23

Acoustics
new Eastman acoustic
Sigma dm3 dread x2 (his and hers)
Fender 12 str
Ibanez exotic wood
Silvercreek rosewood 00
Ovation steel str
martin backpacker acoustic
Johnson dobro

Was that a real original wrhb? That and and mjt body may be the only value there? And I don't like that color.
golem
Reactions:
Posts: 983
Joined: Wed May 27, 2020 1:44 pm

nomadh wrote: Sat Jun 27, 2020 10:02 pm Was that a real original wrhb? That and and mjt body may be the only value there? And I don't like that color.
That's what he says. I just don't know much about truss rod issues hence the ask.
User avatar
Rollin Hand
Reactions:
Posts: 1443
Joined: Wed May 27, 2020 1:38 pm

I am betting the refret is partly to blame. Apparently they can cause too much back bow if not done properly.

Aside from that, it's a bolt on. You can bolt a new neck on, and still sell later with the original neck.
"I'm not a sore loser. It's just that I prefer to win, and when I don't, I get furious."
- Ron Swanson
Post Reply