source: https://dri ve.google.com/file/d/12gYBf7hSTwXP1HcB70M-JvnOx2Lmre9R/view?pli=1In certain countries, (specifically, Nordic countries), is it totally forbidden to open up any electronic equipment or to work on them at all unless you are a fully qualified and approved technician. Please check the laws in your country and do not attempt to change valves/tubes or re-bias the amplifier if the law forbids this.
Illegal to work on your own electronics in Nordic countries?
I ran across this weird claim in a Victory amplifier manual. Anybody ever heard of this claim before, or know what the law actually covers? I couldn't find anything about it.
Sounds like the good ole U.S.A & John Deere farm equipment.
I saw a few days ago a bunch of people (like farmers) have managed to get a bill in congress giving them the "Right to Repair."
I saw a few days ago a bunch of people (like farmers) have managed to get a bill in congress giving them the "Right to Repair."
Gandalf the Intonationer
- BatUtilityBelt
- Reactions:
- Posts: 1732
- Joined: Thu May 28, 2020 4:25 pm
Yup. Any way they can find to get you to keep paying for what you already own, they will. Heard of car companies requiring subscription service for features like seat heaters?
Toyota if memory serves.BatUtilityBelt wrote: ↑Fri Jan 19, 2024 3:19 pm Yup. Any way they can find to get you to keep paying for what you already own, they will. Heard of car companies requiring subscription service for features like seat heaters?
Gandalf the Intonationer
Some the remote start was subscription. Some Fords the NAV works for a few years then wants a subscription. Without it, the NAV only works as a map.
As to certain countries forbidding you to work on your own electronics, wonder why, unless people were burning their houses down or getting electrocuted. Could be insurance companies pushing it. " Listening to rock&roll music while driving causes more accidents than other styles of music. Therefore, when in drive mode, you will be limited to the GOV approved stations only."
As to certain countries forbidding you to work on your own electronics, wonder why, unless people were burning their houses down or getting electrocuted. Could be insurance companies pushing it. " Listening to rock&roll music while driving causes more accidents than other styles of music. Therefore, when in drive mode, you will be limited to the GOV approved stations only."
AGF refugee
- toomanycats
- Reactions:
- Posts: 1896
- Joined: Wed May 27, 2020 7:43 pm
Don't even think about removing a mattress tag. I heard about this guy doing twenty years on a Sealy Posturpedic rap.
“There are only two means of refuge from the miseries of life: Music and Cats!” Albert Schweitzer
- tonebender
- Reactions:
- Posts: 1525
- Joined: Sun May 31, 2020 8:39 am
- Location: Wheremyhathangs, FL
- Gearlist: Fav: Gibson LP and Gibson Goldtone Amp. Other gear: Gretsch, Peavey, Taylor and more.
Some of those tags now way except the "consumer". I just saw one last week and thought that is a change from the old days.
"Will follow through with a transaction when the terms are agreed upon" almightybunghole
-
- Reactions:
- Posts: 1946
- Joined: Thu May 28, 2020 7:14 am
This sounds like a job for @deeaaglasshand wrote: ↑Fri Jan 19, 2024 1:00 pm I ran across this weird claim in a Victory amplifier manual. Anybody ever heard of this claim before, or know what the law actually covers? I couldn't find anything about it.
source: https://dri ve.google.com/file/d/12gYBf7hSTwXP1HcB70M-JvnOx2Lmre9R/view?pli=1In certain countries, (specifically, Nordic countries), is it totally forbidden to open up any electronic equipment or to work on them at all unless you are a fully qualified and approved technician. Please check the laws in your country and do not attempt to change valves/tubes or re-bias the amplifier if the law forbids this.
@Tonray's Ghost @glasshand Yes the laws are pretty strict in theory, there's quite short a list of what are you allowed to do with electric stuff without a license.
It's pretty much limited to making simple connections like replacing a damaged plug on a cord and such. However, it's not like it's strictly enforced. Many people do quite a bit of electric installations and such, but typically they'd OK them by a technician, and make final connections.
You can for instance freely build a tube amp, or repair your amp, but by law you aren't allowed to sell them as working amps, only as partially unfinished kits, and let the buyer know they are responsible for having it checked by a technician before use.
Like when I've posted about modding my amps, there's always some who say "that isn't really allowed, shouldn't promote that kind of stuff, should get it done by a technician, remember you can't sell it now as a safe device, beware if it starts a house fire the insurance might deny paying anything due to illegal electric work..."
Some forums even downright have rules that you can't post about such mods etc DIY guides because they require a licence.
But it's all about drawing the line. I can't inagy
Sent from my M2103K19G using Tapatalk
It's pretty much limited to making simple connections like replacing a damaged plug on a cord and such. However, it's not like it's strictly enforced. Many people do quite a bit of electric installations and such, but typically they'd OK them by a technician, and make final connections.
You can for instance freely build a tube amp, or repair your amp, but by law you aren't allowed to sell them as working amps, only as partially unfinished kits, and let the buyer know they are responsible for having it checked by a technician before use.
Like when I've posted about modding my amps, there's always some who say "that isn't really allowed, shouldn't promote that kind of stuff, should get it done by a technician, remember you can't sell it now as a safe device, beware if it starts a house fire the insurance might deny paying anything due to illegal electric work..."
Some forums even downright have rules that you can't post about such mods etc DIY guides because they require a licence.
But it's all about drawing the line. I can't inagy
Sent from my M2103K19G using Tapatalk
--
Grunge lives!
Real name: Antti Heikkinen Location: Finland
Web presences:
https://www.facebook.com/mosfite/
https://www.youtube.com/@Mosfite
http://www.mosfite.com (redirects to Google site)
Grunge lives!
Real name: Antti Heikkinen Location: Finland
Web presences:
https://www.facebook.com/mosfite/
https://www.youtube.com/@Mosfite
http://www.mosfite.com (redirects to Google site)
Imagine anyone having issues with changing tubes and fuses even inside the amp, but already if it doesn't have external bias points etc it's strongly suggested you shouldn't do it yourself.
But no, there's nobody checking up on that and all that...just that if you do electric stuff involving 230V or stronger, work yourself, you're responsible and possibly liable for later issues/damage if there have been errors in installation.
As an example, I installed the power lines and ran them through the walls myself, when we installed the home charger for our EV, a 3x16A 11,000W charger ...as well as the base plate for the charger. But I got all the cables etc from an electrician, who then checked everything is fine, and who then did the connections inside the fuse panel and the charger and did the appropriate tests and certificates.
Sent from my M2103K19G using Tapatalk
But no, there's nobody checking up on that and all that...just that if you do electric stuff involving 230V or stronger, work yourself, you're responsible and possibly liable for later issues/damage if there have been errors in installation.
As an example, I installed the power lines and ran them through the walls myself, when we installed the home charger for our EV, a 3x16A 11,000W charger ...as well as the base plate for the charger. But I got all the cables etc from an electrician, who then checked everything is fine, and who then did the connections inside the fuse panel and the charger and did the appropriate tests and certificates.
Sent from my M2103K19G using Tapatalk
--
Grunge lives!
Real name: Antti Heikkinen Location: Finland
Web presences:
https://www.facebook.com/mosfite/
https://www.youtube.com/@Mosfite
http://www.mosfite.com (redirects to Google site)
Grunge lives!
Real name: Antti Heikkinen Location: Finland
Web presences:
https://www.facebook.com/mosfite/
https://www.youtube.com/@Mosfite
http://www.mosfite.com (redirects to Google site)
- uwmcscott
- Reactions:
- Posts: 1489
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
I work for a company that is HQ'd in Norway. I've only been there a handful of times but one of my co-workers is also an amateur photographer and tinkerer, and he has a whole garage studio filled with projects and electronic equipment in varioius stages of "repair" I won't give any more details to keep the Nordic Electronics Police at bay... Another friend of mine has a cabin that we visited when I was there in December, and he essentially built the whole thing from the ground up himself, including all the plumbing and electric. So i'm going to also guess it's similar to the mattress tag statement in the US
AGF Survivor Champ Emeritus (Ask TVVoodoo )
- andrewsrea
- Reactions:
- Posts: 1382
- Joined: Wed May 27, 2020 4:43 pm
- Location: Lake Saint Louis, MO
- Gearlist: 28 Guitars: (2) basses, (2) acoustics, (3) hollow bodies, (3) Semi hollow, (1) Double-neck, (17) Solid-bodies
That is pure grift. You pay $40K for a car loaded with features and the brand hacks your car and shuts off features. Happened to my wife's Rav4 Hybrid, where her navigation app no longer works, because we don't want to pay $240 per year to have it and other useless apps. Yet they retain the ability to access my wife's car whenever they want.BatUtilityBelt wrote: ↑Fri Jan 19, 2024 3:19 pm Yup. Any way they can find to get you to keep paying for what you already own, they will. Heard of car companies requiring subscription service for features like seat heaters?
Live life to the fullest! - Rob
- uwmcscott
- Reactions:
- Posts: 1489
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
Where did you find a new car loaded with features for 40Kandrewsrea wrote: ↑Sat Jan 20, 2024 11:10 am You pay $40K for a car loaded with features and the brand hacks your car and shuts off features.
I recently purchased ( against my own best judgement ) a 2023 F150 to replace my 2017. The whole price craziness aside, indeed it is more like an electronic device than a mechanical vehicle. I have been playing around with a software tool ( in read only mode ) that essentially enables/configures/disables things that are chargeable options on the window sticker. The inside of the engine compartment also looks more like the inside of a kitchen appliance than a vehicle. There is a 5.0 v8 engine block buried somewhere under all the plastic and aluminum/wires but it's hard to tell!
AGF Survivor Champ Emeritus (Ask TVVoodoo )
I remember reading at the beginning of the Ukrainian conflict that John Deere was able to remotely disable all the farm equipment that the Russians had looted and shipped out...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Dunno whether the 23 is like the 24 or not but I was reading that a REPLACEMENT HEADLAMP for a 2024 F150 isuwmcscott wrote: ↑Sat Jan 20, 2024 11:30 amWhere did you find a new car loaded with features for 40Kandrewsrea wrote: ↑Sat Jan 20, 2024 11:10 am You pay $40K for a car loaded with features and the brand hacks your car and shuts off features.
I recently purchased ( against my own best judgement ) a 2023 F150 to replace my 2017.
a tad over $6,000.00 !
Gandalf the Intonationer
- uwmcscott
- Reactions:
- Posts: 1489
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
That's a bit of an exaggeration but yes, the headlight and taillight assemblies on most of these new vehicles are very expensive. Mostly because they contain a lot more than just lights - there are cameras, motion sensors, and all kinds of other crap in there to augment the safety/automated driving features.
I got rear-ended in my 2017 and even though the taillight assemblies were not physically damaged, ford recommends replacment due to all the sensors. I saw the insurance write up and I think they were $700 a pop.
Having said all that, the headlights in new vehicles are amazing from a drivers perspective. We also got a 2023 Mazda CX9 for my wife and it has headlights that turn as you steer. I'm sure it's stupid expensive to replace but it's a very cool and useful feature.
AGF Survivor Champ Emeritus (Ask TVVoodoo )
It's getting to be difficult to sustain an older car all the time. They're so complicated and many parts expensive.
I'm moving on to new cars only. Got my first EV last spring as a kind of a test, and I can and I will return it in a few months, when the year is up. It's too small and the range is too short.
I'm gonna switch from buying 6-5 year old cars to buying them new, get a 5 year or so warranty for them, keep them 3-4 years and swap for a new one again.
It's only gonna be a little more expensive, but not that much, and no more worries or sudden expenses.
Have decided on buying the modern T Ford, the Tesla Y next, in 4wd long range. That should serve us well for a few years.
Sent from my M2103K19G using Tapatalk
I'm moving on to new cars only. Got my first EV last spring as a kind of a test, and I can and I will return it in a few months, when the year is up. It's too small and the range is too short.
I'm gonna switch from buying 6-5 year old cars to buying them new, get a 5 year or so warranty for them, keep them 3-4 years and swap for a new one again.
It's only gonna be a little more expensive, but not that much, and no more worries or sudden expenses.
Have decided on buying the modern T Ford, the Tesla Y next, in 4wd long range. That should serve us well for a few years.
Sent from my M2103K19G using Tapatalk
--
Grunge lives!
Real name: Antti Heikkinen Location: Finland
Web presences:
https://www.facebook.com/mosfite/
https://www.youtube.com/@Mosfite
http://www.mosfite.com (redirects to Google site)
Grunge lives!
Real name: Antti Heikkinen Location: Finland
Web presences:
https://www.facebook.com/mosfite/
https://www.youtube.com/@Mosfite
http://www.mosfite.com (redirects to Google site)
Actually, it really isn't an exaggeration. I say that because it made the news this week.uwmcscott wrote: ↑Sat Jan 20, 2024 1:46 pmThat's a bit of an exaggeration but yes, the headlight and taillight assemblies on most of these new vehicles are very expensive. Mostly because they contain a lot more than just lights - there are cameras, motion sensors, and all kinds of other crap in there to augment the safety/automated driving features.
I got rear-ended in my 2017 and even though the taillight assemblies were not physically damaged, ford recommends replacment due to all the sensors. I saw the insurance write up and I think they were $700 a pop.
The subject actually came up with with us because I loaned my Miata to a friend recently and she hit a deer!
No fault of hers, the deer jumped off the roadbank directly in front of the Miata, thus no time to brake, swerve or anything.
Anyhoo it busted the Miata headlamp and the replacement was just under $2000 so when the $6000 F150 headlamp popped
up on the news a day or so later she latched on to it & made sure I saw it!
Gandalf the Intonationer
- andrewsrea
- Reactions:
- Posts: 1382
- Joined: Wed May 27, 2020 4:43 pm
- Location: Lake Saint Louis, MO
- Gearlist: 28 Guitars: (2) basses, (2) acoustics, (3) hollow bodies, (3) Semi hollow, (1) Double-neck, (17) Solid-bodies
When I worked for Boeing, many of their products had proprietary anti-tamper software. Say an F-15 went down (they never do) and ended up in enemy hands and they start reverse engineering the code, it basically erases memory and fries some of the computer components.
Live life to the fullest! - Rob
-
- Reactions:
- Posts: 1946
- Joined: Thu May 28, 2020 7:14 am
All deer should be required to carry liability insurancemickey wrote: ↑Sat Jan 20, 2024 1:56 pmActually, it really isn't an exaggeration. I say that because it made the news this week.uwmcscott wrote: ↑Sat Jan 20, 2024 1:46 pmThat's a bit of an exaggeration but yes, the headlight and taillight assemblies on most of these new vehicles are very expensive. Mostly because they contain a lot more than just lights - there are cameras, motion sensors, and all kinds of other crap in there to augment the safety/automated driving features.
I got rear-ended in my 2017 and even though the taillight assemblies were not physically damaged, ford recommends replacment due to all the sensors. I saw the insurance write up and I think they were $700 a pop.
The subject actually came up with with us because I loaned my Miata to a friend recently and she hit a deer!
No fault of hers, the deer jumped off the roadbank directly in front of the Miata, thus no time to brake, swerve or anything.
Anyhoo it busted the Miata headlamp and the replacement was just under $2000 so when the $6000 F150 headlamp popped
up on the news a day or so later she latched on to it & made sure I saw it!
- Rollin Hand
- Reactions:
- Posts: 1449
- Joined: Wed May 27, 2020 1:38 pm
So Ford is moving from the F-150 to "Eff that noise!"mickey wrote: ↑Sat Jan 20, 2024 1:56 pmActually, it really isn't an exaggeration. I say that because it made the news this week.uwmcscott wrote: ↑Sat Jan 20, 2024 1:46 pmThat's a bit of an exaggeration but yes, the headlight and taillight assemblies on most of these new vehicles are very expensive. Mostly because they contain a lot more than just lights - there are cameras, motion sensors, and all kinds of other crap in there to augment the safety/automated driving features.
I got rear-ended in my 2017 and even though the taillight assemblies were not physically damaged, ford recommends replacment due to all the sensors. I saw the insurance write up and I think they were $700 a pop.
The subject actually came up with with us because I loaned my Miata to a friend recently and she hit a deer!
No fault of hers, the deer jumped off the roadbank directly in front of the Miata, thus no time to brake, swerve or anything.
Anyhoo it busted the Miata headlamp and the replacement was just under $2000 so when the $6000 F150 headlamp popped
up on the news a day or so later she latched on to it & made sure I saw it!
"I'm not a sore loser. It's just that I prefer to win, and when I don't, I get furious."
- Ron Swanson
- Ron Swanson
Preston Tucker is smirking from his grave.uwmcscott wrote: ↑Sat Jan 20, 2024 1:46 pm Having said all that, the headlights in new vehicles are amazing from a drivers perspective. We also got a 2023 Mazda CX9 for my wife and it has headlights that turn as you steer. I'm sure it's stupid expensive to replace but it's a very cool and useful feature.
(https://en.wikipedia.org/wiki/Tucker_48 ... n_features if you don't get the reference. The Tucker 48 was the first production car in the US to have a directional headlight.)