A nice deal on a sweet lefty AL3K with the original headstock...@tobijohn perhaps?
https://www.guitarcenter.com/Used/Agile ... -Guitar.gc
Lefty AL3K Original Headstock at GC- $249!
- slowhand84
- Reactions:
- Posts: 994
- Joined: Thu May 28, 2020 2:12 pm
There were older 3Ks with the old headstock that were like that, although they were very short lived. It's definitely a 3K - ebony board, abalone inlays, etc. If it had a newer headstock I would assume maybe it was a custom order, but the semi-customs didn't exist back then.
I was thinking the same "if it had the new headstock it could be a semi-custom." I don't remember ever seeing a 3k with no binding until semi-customs.slowhand84 wrote: ↑Tue May 04, 2021 2:33 pmThere were older 3Ks with the old headstock that were like that, although they were very short lived. It's definitely a 3K - ebony board, abalone inlays, etc. If it had a newer headstock I would assume maybe it was a custom order, but the semi-customs didn't exist back then.
And then I wondered why anyone would pay extra to cheapen it.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Gandalf the Intonationer
Interesting and thanks for the heads-up, it's like an Agile Studio....
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- BatUtilityBelt
- Reactions:
- Posts: 1809
- Joined: Thu May 28, 2020 4:25 pm
That's a good price. @tobijohn I know you like to have one of everything Agile, so if you want it, click buy. I'll think about it a little while.
Yeah, I went ahead and bought it. I've got some with the original headstock (and a few with the original horn) but not a 3000 with that finish and definitely nothing normally unbound...BatUtilityBelt wrote: ↑Tue May 04, 2021 2:53 pm That's a good price. @tobijohn I know you like to have one of everything Agile, so if you want it, click buy. I'll think about it a little while.
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- BatUtilityBelt
- Reactions:
- Posts: 1809
- Joined: Thu May 28, 2020 4:25 pm
- slowhand84
- Reactions:
- Posts: 994
- Joined: Thu May 28, 2020 2:12 pm
Sweet! Happy to enable as alwaystobijohn wrote: ↑Tue May 04, 2021 2:58 pmYeah, I went ahead and bought it. I've got some with the original headstock (and a few with the original horn) but not a 3000 with that finish and definitely nothing normally unbound...BatUtilityBelt wrote: ↑Tue May 04, 2021 2:53 pm That's a good price. @tobijohn I know you like to have one of everything Agile, so if you want it, click buy. I'll think about it a little while.
![Laughing :lol:](./images/smilies/icon_lol.gif)
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
It may well be one of the earliest al-3000m's.
Those came with no binding, and the pearloid TRC.
https://www.rondomusic.com/al3000mleft.html
Those came with no binding, and the pearloid TRC.
https://www.rondomusic.com/al3000mleft.html
I am, that's why you'll see me standing on the local I95 exit ramp holding up a cardboard sign that says "Will work for Agiles"...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Apparently, it also has a maple cap...mighty_duck wrote: ↑Tue May 04, 2021 3:41 pm It may well be one of the earliest al-3000m's.
Those came with no binding, and the pearloid TRC.
https://www.rondomusic.com/al3000mleft.html
image.png
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- slowhand84
- Reactions:
- Posts: 994
- Joined: Thu May 28, 2020 2:12 pm
Sweet thanks for finding this, this is exactly the one I was thinking about when speaking with @mickey above but couldn't locate the Rondo page.mighty_duck wrote: ↑Tue May 04, 2021 3:41 pm It may well be one of the earliest al-3000m's.
Those came with no binding, and the pearloid TRC.
https://www.rondomusic.com/al3000mleft.html
image.png
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
I'm a binding fanatic as well.
I had one of them, and eventually sold it when I got a bound AL-3000m (also because of the 10 pounds).
It was a fantastic guitar though, one of the best playing Agiles I ever had.
- BatUtilityBelt
- Reactions:
- Posts: 1809
- Joined: Thu May 28, 2020 4:25 pm
I have to admit - if that guitar had been born without its pick guard, I would have had to buy it.
I posted this in another lefty related thread but here it is again. I think I might justr copy or rename this thread "Lefty Used Deals" so going forward, everything is in one place:
Here's an AL-3010SE in definitely better shape. With the upgraded Hipshots and a HSC and considering the drift up in used values, I suppose $350 shipped is decent deal but not an exciting one at the listed price. I might have considered throwing a bid out there around $250 and settling for $275 but I've got that finish on another AL and have 3010SEs up the wazoo so I'm staying on the sidelines. Links to it and original Rondo page below:
https://reverb.com/item/40495391-left-h ... Experiment
https://www.rondomusic.com/AL3010SEROOTbeerflleft.html
Here's an AL-3010SE in definitely better shape. With the upgraded Hipshots and a HSC and considering the drift up in used values, I suppose $350 shipped is decent deal but not an exciting one at the listed price. I might have considered throwing a bid out there around $250 and settling for $275 but I've got that finish on another AL and have 3010SEs up the wazoo so I'm staying on the sidelines. Links to it and original Rondo page below:
https://reverb.com/item/40495391-left-h ... Experiment
https://www.rondomusic.com/AL3010SEROOTbeerflleft.html
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
UPDATE:
It arrived a few days ago, safe and sound despite a so-so packing job. The GC description was "Good" but other than slightly tarnished pickup covers (they look to be that brushed style), I would rate the rest of the guitar as excellent.
It didn't need much of a setup but unless it's some sort of "player's hack", whoever installed the last set of strings did it backwards so they pull from the outside of the tuner. I was like WTH when I initially tuned it up as you have to turn opposite to what is normal. Anyway, it will get a new set once my Hosco fret erasers get here. The frets are fine, just thought I'd give the guitar a general cleanup. I threw a pickguard on it as well and will look around for a blank black TRC.
Also, it has binding after all, it's the natural stuff which wasn't apparent in the GC typical low quality pictures. Pickups sound great and will remain in the guitar. These old Agiles I generally just leave alone, although the pots are a bit scratchy and if De-Oxit doesn't take care of that, I'll replace them with the higher quality brass shaft Alphas. A few mediocre pics from my phone below:
It arrived a few days ago, safe and sound despite a so-so packing job. The GC description was "Good" but other than slightly tarnished pickup covers (they look to be that brushed style), I would rate the rest of the guitar as excellent.
It didn't need much of a setup but unless it's some sort of "player's hack", whoever installed the last set of strings did it backwards so they pull from the outside of the tuner. I was like WTH when I initially tuned it up as you have to turn opposite to what is normal. Anyway, it will get a new set once my Hosco fret erasers get here. The frets are fine, just thought I'd give the guitar a general cleanup. I threw a pickguard on it as well and will look around for a blank black TRC.
Also, it has binding after all, it's the natural stuff which wasn't apparent in the GC typical low quality pictures. Pickups sound great and will remain in the guitar. These old Agiles I generally just leave alone, although the pots are a bit scratchy and if De-Oxit doesn't take care of that, I'll replace them with the higher quality brass shaft Alphas. A few mediocre pics from my phone below:
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar