DOH!
I just bought that Tele at $84.99, as did @t100d !
Just got mine last night and only looked it over briefly; no glaring issues at first glance.
I did notice these have medium something sized frets - dont know how that compares to Fender or similar, but the Rondo SX strat / tele I have / had were all much larger.
PSA - the deal thread
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
The monoprice coupon applies to other guitars as well:
You can get this for $129 Or this for $109 https://www.monoprice.com/product?p_id=610455
https://www.monoprice.com/product?p_id=610404
https://www.monoprice.com/product?p_id=610402
https://www.monoprice.com/product?p_id=610454
Only an hour left though
You can get this for $129 Or this for $109 https://www.monoprice.com/product?p_id=610455
https://www.monoprice.com/product?p_id=610404
https://www.monoprice.com/product?p_id=610402
https://www.monoprice.com/product?p_id=610454
Only an hour left though
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
There's a B-Stock black Harm up on Rondo for $400. Not a lot of chances to get a new Harm these days. A little bit of orange peel finish on the headstock.
https://www.rondomusic.com/product10842.html
https://www.rondomusic.com/product10842.html
MD SDOTD
12 PACK D'Addario EXL110 10-46 $34.99
= $2.92/ pack!
https://www.musiciansfriend.com/stupid
12 PACK D'Addario EXL110 10-46 $34.99
= $2.92/ pack!
https://www.musiciansfriend.com/stupid
Old AGF since Feb. 2015; refugee of the Great MOMO Purge of May 2020.
BlackSun Guitar Amp Plugin Free at Audio Assault
https://audioassault.mx/collections/plu ... s/blacksun
https://audioassault.mx/collections/plu ... s/blacksun
Aaron
---------------
"What is perfect pitch?"
"Perfect pitch is when you toss a banjo into the dumpster, it hits an accordion and they both break."
---------------
"What is perfect pitch?"
"Perfect pitch is when you toss a banjo into the dumpster, it hits an accordion and they both break."
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
Breedlove Organic collection, all solid wood acoustics for $379-399 (Restock)
Pretty good deal for an all solid wood from a good brand. Not sure what restock means, maybe customer returns?
You can buy through MF and get 8% back in MF rewards, or buy through Guitar Center.
Spruce/mahogany AE $399
https://www.musiciansfriend.com/guitars ... 3002001000
All mahogany $399
https://www.musiciansfriend.com/guitars ... 8002001000
All mahogany natural $379
https://www.musiciansfriend.com/guitars ... 4002001000
Pretty good deal for an all solid wood from a good brand. Not sure what restock means, maybe customer returns?
You can buy through MF and get 8% back in MF rewards, or buy through Guitar Center.
Spruce/mahogany AE $399
https://www.musiciansfriend.com/guitars ... 3002001000
All mahogany $399
https://www.musiciansfriend.com/guitars ... 8002001000
All mahogany natural $379
https://www.musiciansfriend.com/guitars ... 4002001000
I like cheap pedals. This Dalamo D11 Rat based is $12.03 free shipping. Made an offer and bought two.
https://www.ebay.com/itm/393639054367
https://www.ebay.com/itm/393639054367
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
If you're a lefty, and little handy, this is a great deal. Our friend Kurt put up a C-stock Valkyrie. Bridge is set a little too far.
Might be fixable with a wider bridge, or by redrilling bridge position.
$125 + Shipping.
https://www.rondomusic.com/product10918.html
There are also a few sets of Grover 3+3 tuners in nickel or gold for $22. I bought a bunch of those and retrofitted cheaper Chinese guitars - made them at least 40% better. Also lots of lefty 6 in line sets.
https://www.rondomusic.com/Grover_Rotom ... 2-18C.html
https://www.rondomusic.com/product5102.html
Might be fixable with a wider bridge, or by redrilling bridge position.
$125 + Shipping.
https://www.rondomusic.com/product10918.html
There are also a few sets of Grover 3+3 tuners in nickel or gold for $22. I bought a bunch of those and retrofitted cheaper Chinese guitars - made them at least 40% better. Also lots of lefty 6 in line sets.
https://www.rondomusic.com/Grover_Rotom ... 2-18C.html
https://www.rondomusic.com/product5102.html
For that price, I would consider buying a harmonica bridge for it.
Fill/redrill is super easy though. I've done it a few times converting lefty to righty or upsizing to USA bushings.
Sent from my SM-G998U using Tapatalk
Fill/redrill is super easy though. I've done it a few times converting lefty to righty or upsizing to USA bushings.
Sent from my SM-G998U using Tapatalk
10 years, 2 months, and 8 days of blissful ignorance ruined by that snake in the grass Major Tom.
It's gone now, hopefully on its way to you...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
According to the email I got this morning it is ready to ship
It may result in another guitar getting evicted though if it is as nice as my OG short horn Valk I sold previously, my new CV Tele and this will cause a game of musical chairs to ensue. I am officially out of wall hangers and I've got 2 full racks. One is going to have to sit in my office chair when I am not in the room or it gets sent to deep storage in a case and then sold if it doesn't see the light of day for more than a month or two.
10 years, 2 months, and 8 days of blissful ignorance ruined by that snake in the grass Major Tom.
Any chance this is a problem at, or fixable at the nut itself or nut slot?mighty_duck wrote: ↑Tue Nov 30, 2021 5:02 pm Our friend Kurt put up a C-stock Valkyrie. Bridge is set a little too far.
Old AGF since Feb. 2015; refugee of the Great MOMO Purge of May 2020.
FWIW, another one with the same problem just popped up:jtcnj wrote: ↑Wed Dec 01, 2021 12:04 pmAny chance this is a problem at, or fixable at the nut itself or nut slot?mighty_duck wrote: ↑Tue Nov 30, 2021 5:02 pm Our friend Kurt put up a C-stock Valkyrie. Bridge is set a little too far.
https://www.rondomusic.com/product10918.html
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
Didn't last long! Anyone here get it?tobijohn wrote: ↑Wed Dec 01, 2021 12:26 pm FWIW, another one with the same problem just popped up:
https://www.rondomusic.com/product10918.html
Not me, I thought about it but hoped someone would step up and save me the time and expense.mighty_duck wrote: ↑Wed Dec 01, 2021 1:38 pmDidn't last long! Anyone here get it?tobijohn wrote: ↑Wed Dec 01, 2021 12:26 pm FWIW, another one with the same problem just popped up:
https://www.rondomusic.com/product10918.html
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
Hard to know with Kurt. His descriptions are often wrong, and we don't know how long he spent analyzing the issue.jtcnj wrote: ↑Wed Dec 01, 2021 12:04 pmAny chance this is a problem at, or fixable at the nut itself or nut slot?mighty_duck wrote: ↑Tue Nov 30, 2021 5:02 pm Our friend Kurt put up a C-stock Valkyrie. Bridge is set a little too far.
But assuming it is a bridge that was drilled out of position, it can only be fixed there. Moving the nut would just solve the intonation issue at the 0th fret.
IIRC, there were four at most and maybe only two available on that last pre-order so I'm assuming the entire run was bad in that respect...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- BatUtilityBelt
- Reactions:
- Posts: 1722
- Joined: Thu May 28, 2020 4:25 pm
Not me. The Valkyrie just never called me.mighty_duck wrote: ↑Wed Dec 01, 2021 1:38 pmDidn't last long! Anyone here get it?tobijohn wrote: ↑Wed Dec 01, 2021 12:26 pm FWIW, another one with the same problem just popped up:
https://www.rondomusic.com/product10918.html
Nor I. Got mine before it was redesigned by Salvador Dali.BatUtilityBelt wrote: ↑Wed Dec 01, 2021 2:41 pmNot me. The Valkyrie just never called me.mighty_duck wrote: ↑Wed Dec 01, 2021 1:38 pmDidn't last long! Anyone here get it?tobijohn wrote: ↑Wed Dec 01, 2021 12:26 pm FWIW, another one with the same problem just popped up:
https://www.rondomusic.com/product10918.html
Gandalf the Intonationer
- mighty_duck
- Reactions:
- Posts: 223
- Joined: Wed May 27, 2020 8:04 pm
Another one is up now...tobijohn wrote: ↑Wed Dec 01, 2021 1:42 pmNot me, I thought about it but hoped someone would step up and save me the time and expense.mighty_duck wrote: ↑Wed Dec 01, 2021 1:38 pmDidn't last long! Anyone here get it?tobijohn wrote: ↑Wed Dec 01, 2021 12:26 pm FWIW, another one with the same problem just popped up:
https://www.rondomusic.com/product10918.html
The entire lot must have been bad. It's a little scary that all of them were passed by the factory QA. If I were Kurt, it would be "Lucyyyy, you got some splainin' to do"...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar