https://reverb.com/item/34580458-agile- ... baccoburst
Lefty AL3125 on the verb
-
uwmcscott
- Reactions:
- Posts: 1505
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
For Those who may not remember, the AL3125 was basically a 3100 with some chambering for weight relief. They were not too common, especially not in left handed config. This looks like a nice one with a nice case too. Price is a probably a little high but offers are accepted
https://reverb.com/item/34580458-agile- ... baccoburst
https://reverb.com/item/34580458-agile- ... baccoburst
- Attachments
-
AGF Survivor Champ Emeritus (Ask TVVoodoo )
ARRRGGGHHH. An Agile I really like and I can't afford it.
Thanks for the heads-up. Judging from the production photos (always a risky thing to do with Rondo), it looks like the old style, thicker AL-31xxx series (small gap between the jack plate and the body binding). Based on the year of manufacture, it was probably one of the last of the old style L-3xxx guitars:
https://www.rondomusic.com/AL31252TSLEFT1.HTML
The price new with HSC back then was probably around $500 shipped so this one is priced higher than new. Seller is probably close to firm on the price too as there are two offers for it since it was listed a couple days ago. FWIW, there's an identical righty version also currently listed for $375 w/HSC although it does have a sanded neck...
https://www.rondomusic.com/AL31252TSLEFT1.HTML
The price new with HSC back then was probably around $500 shipped so this one is priced higher than new. Seller is probably close to firm on the price too as there are two offers for it since it was listed a couple days ago. FWIW, there's an identical righty version also currently listed for $375 w/HSC although it does have a sanded neck...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
-
uwmcscott
- Reactions:
- Posts: 1505
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
Link to the righty by chance? I have a feed for agile and don’t recall seeing that one.tobijohn wrote: ↑Sat Jul 11, 2020 11:13 am Thanks for the heads-up. Judging from the production photos (always a risky thing to do with Rondo), it looks like the old style, thicker AL-31xxx series (small gap between the jack plate and the body binding). Based on the year of manufacture, it was probably one of the last of the old style L-3xxx guitars:
https://www.rondomusic.com/AL31252TSLEFT1.HTML
The price new with HSC back then was probably around $500 shipped so this one is priced higher than new. Seller is probably close to firm on the price too as there are two offers for it since it was listed a couple days ago. FWIW, there's an identical righty version also currently listed for $375 w/HSC although it does have a sanded neck...
AGF Survivor Champ Emeritus (Ask TVVoodoo )
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
-
uwmcscott
- Reactions:
- Posts: 1505
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
I do remember that one, looks like it ended a while ago though
AGF Survivor Champ Emeritus (Ask TVVoodoo )
-
uwmcscott
- Reactions:
- Posts: 1505
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
No worries. I actually made an offer on that one but he did not accept. I bid a little low based on the sanded neck.
There is a honey burst 3100 with a case out there that I’ve been trying to talk the guy Into shipping, big it’s his first listing and he’s a bit gun shy.
AGF Survivor Champ Emeritus (Ask TVVoodoo )
https://media1.tenor.com/images/14c465d ... id=5591465
- image.gif (1.31 MiB) Viewed 2402 times
- Attachments
-
- image.gif (1.31 MiB) Viewed 2402 times
???
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
I pulled the trigger. Actually, I made an offer and it worked for him. The binding, tobacco burst on flame maple, the wide neck and the weight...
I saw it and thought, “damn, if I had money burning a hole in my pocket ” and a few hours later I discovered I had unexpected funds. He got all of it. I figured Kurt is winding down the brand and the range of southpaw models is narrowing. Don’t think there’s many of these.
Congrats! I thought that might haven what you meant but it was a bit on the pricey side and with two offers already made, I figured he wasn't interested in going much lower than maybe 10% which still put it still well out side my limit of paying no more than 2/3rds the new value. Normally, I might have deviated a bit from that formula because of its rarity but i haven't really been in a buying mood lately...Brendan wrote: ↑Sun Jul 12, 2020 4:27 pm
I pulled the trigger. Actually, I made an offer and it worked for him. The binding, tobacco burst on flame maple, the wide neck and the weight...
I saw it and thought, “damn, if I had money burning a hole in my pocket ” and a few hours later I discovered I had unexpected funds. He got all of it. I figured Kurt is winding down the brand and the range of southpaw models is narrowing. Don’t think there’s many of these.
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Try to put up a few pics of the real thing once you get it.
Also, how about a short synopsis of the Harley Benton double cutaway Junior you recently got? I know a lot of people have been eyeing that particular model...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
I don't think there is one here yet but it's as good a time as any to start one...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
-
uwmcscott
- Reactions:
- Posts: 1505
- Joined: Wed May 27, 2020 1:45 pm
- Location: Northern Wisco
- Gearlist: A few LP's, a Strat, a Tele and a few acoustics.
Congrats. For all the reasons you mentioned I would have seriously considered this one if it was a righty. Mojo for safe shipping.
AGF Survivor Champ Emeritus (Ask TVVoodoo )
I can't recall ever having any problems with a 3000 series harness although I've replaced a couple of the box toggle switches with a Switchcraft type just because. Anyway, I know of at least two projects sitting in your closet that should take precedence over that...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar