UPDATE
I heard back from Kurt this morning and he said that there will be a lefty P90 Gold Top AD-3200MCC (and possibly a P90 Gold Top AL-3200MCC) added to the production schedule. Whether that means it will be replacing the CSBF one or on a future production run, as usual it was hard to determine from his response so I replied asking for clarification on that...
Any lefties considering a future AD-3200MCC?
UPDATE
I heard back from Kurt and while he will be adding a left-handed P90 Gold Top AD-3200MCC and AL-3200MCC to the production schedule, I get the impression that he doesn't have a lot of faith that the factory will actually be able to come through. That goes for the lefty CSBF AD-3200MCC as well:
Yes, but I cannot 100% guarantee delivery before year end - everyone has shortages now with factory stuff reduced due to covid....
Kurt
The worst case scenario is that sometime in the future we should see all three...
I heard back from Kurt and while he will be adding a left-handed P90 Gold Top AD-3200MCC and AL-3200MCC to the production schedule, I get the impression that he doesn't have a lot of faith that the factory will actually be able to come through. That goes for the lefty CSBF AD-3200MCC as well:
Yes, but I cannot 100% guarantee delivery before year end - everyone has shortages now with factory stuff reduced due to covid....
Kurt
The worst case scenario is that sometime in the future we should see all three...
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
I’ll be looking forward to the AD-3200 and AL-3200 Gold Top no matter when they come in! Can’t get enough of that combo. Thanks for all the leg work on this!tobijohn wrote: ↑Mon Jul 13, 2020 5:35 pm UPDATE
I heard back from Kurt and while he will be adding a left-handed P90 Gold Top AD-3200MCC and AL-3200MCC to the production schedule, I get the impression that he doesn't have a lot of faith that the factory will actually be able to come through. That goes for the lefty CSBF AD-3200MCC as well:
Yes, but I cannot 100% guarantee delivery before year end - everyone has shortages now with factory stuff reduced due to covid....
Kurt
The worst case scenario is that sometime in the future we should see all three...
- nomadh
- Reactions:
- Posts: 1745
- Joined: Wed May 27, 2020 1:32 pm
- Gearlist: My Gear:Electric
Gibson '13 studio dlx hsb
Gibson '79 flying V
Gibson '06 sg faded
Gibson '15 LP CM w gforce
Epiphone Casino coupe
Epiphone dot studio
Fender USA strat w mjt body _w Original body 81
Fender lead II
Firefly spalted 338
Squier affinity tele bsb
Squier strat std relic
Squier subsonic baritone
Agile al2500 albino
Agile al3001 hsb
Sx ash Ltd strat
Sx ash strat short scale
Sx ash tele
Sx callisto jr
Dean vendetta
Washburn firebird. Ps10
Johnson trans red strat
Johnson jazz box Vegas
Seville explorer
Inlaid tele
flametop bigsby tele wood inlaid neck
23
Acoustics
new Eastman acoustic
Sigma dm3 dread x2 (his and hers)
Fender 12 str
Ibanez exotic wood
Silvercreek rosewood 00
Ovation steel str
martin backpacker acoustic
Johnson dobro
Bug him again about the backs being not only too dark but mostly a very cheap redwash. I like a lighter mahogany but I think most people would like this fine
https://lh3.googleusercontent.com/tJTDR ... authuser=0
This is off a '13 gibson studio deluxe heritage CSB model.
If Agile dark backs looked like this I think sales would kick up.
https://lh3.googleusercontent.com/tJTDR ... authuser=0
This is off a '13 gibson studio deluxe heritage CSB model.
If Agile dark backs looked like this I think sales would kick up.
I never understood the love affair with those dark cherry backs either unless the top also had red in it. A while ago, someone here had emailed Kurt suggested the lighter finish and he replied that minor flaws too easily showed which resulted in an inordinate amount of returns. I'll ask about a mahogany wash going forward but it will be too late for this production run...nomadh wrote: ↑Thu Jul 23, 2020 5:05 pm Bug him again about the backs being not only too dark but mostly a very cheap redwash. I like a lighter mahogany but I think most people would like this fine...
This is off a '13 gibson studio deluxe heritage CSB model.
...If Agile dark backs looked like this I think sales would kick up.
Delightful mix of insolence, arrogance and narcissism
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
Proud RINO trapped in a heavy metal chassis
Growing up, only kid in the neighborhood with an Uncle Ahkbar
- BatUtilityBelt
- Reactions:
- Posts: 1722
- Joined: Thu May 28, 2020 4:25 pm
Well hey, I'd love to see a P90 gold top in either model, so I'll wait and watch. Thanks for digging into that with Kurt!tobijohn wrote: ↑Mon Jul 13, 2020 5:35 pm UPDATE
I heard back from Kurt and while he will be adding a left-handed P90 Gold Top AD-3200MCC and AL-3200MCC to the production schedule, I get the impression that he doesn't have a lot of faith that the factory will actually be able to come through. That goes for the lefty CSBF AD-3200MCC as well:
Yes, but I cannot 100% guarantee delivery before year end - everyone has shortages now with factory stuff reduced due to covid....
Kurt
The worst case scenario is that sometime in the future we should see all three...