I really love the Dunlop Tortex 0.60 picks. I do keep a thicker pick around for heavier sounds occasionally but nothing competes with the 6 as my go to.
How about your taste in picks??
what's your pick thickness?
- RockYoWorld
- Reactions:
- Posts: 289
- Joined: Wed May 27, 2020 4:30 pm
- Location: Milwaukee, WI
- Contact:
That's a loaded question right now. It was 1.0 with my custom Tortex Sharp picks, but I'm switching to the Jazz picks (1.38). I like the standard Jazz picks with the Max Grip feature, but you can't get those custom. I've been trying Tortex Jazz, which are alright, but I got the jumbo, and I'm liking the smaller pick size.
If I had something witty to say, I'd put it here.
- MattFireblade
- Reactions:
- Posts: 62
- Joined: Wed May 27, 2020 5:04 pm
.70 and up, essentially. I think I’ve been reaching for the 1.13 lately but .77 is also a good go-to.
- JimyTheAssassin
- Reactions:
- Posts: 170
- Joined: Wed May 27, 2020 1:50 pm
I’m with you on the Dunlop .60 (and have been for some 15+ years now) but I prefer the Gray nylon grip Picks to the Tortex. Lately I bought some Dunlop picks labeled fender in .73 and they are just a nudge stiffer but they still feel good.
AGF refugee11/30/08-5/28/20 (8,502 posts)
- BrianSkeezer
- Reactions:
- Posts: 202
- Joined: Wed May 27, 2020 4:36 pm
- Location: Maryland
1.14mm Dunlop Tortex or Gator Grip for guitar, 1.0mm Dunlop Tortex Triangle for bass.
- nomadh
- Reactions:
- Posts: 1745
- Joined: Wed May 27, 2020 1:32 pm
- Gearlist: My Gear:Electric
Gibson '13 studio dlx hsb
Gibson '79 flying V
Gibson '06 sg faded
Gibson '15 LP CM w gforce
Epiphone Casino coupe
Epiphone dot studio
Fender USA strat w mjt body _w Original body 81
Fender lead II
Firefly spalted 338
Squier affinity tele bsb
Squier strat std relic
Squier subsonic baritone
Agile al2500 albino
Agile al3001 hsb
Sx ash Ltd strat
Sx ash strat short scale
Sx ash tele
Sx callisto jr
Dean vendetta
Washburn firebird. Ps10
Johnson trans red strat
Johnson jazz box Vegas
Seville explorer
Inlaid tele
flametop bigsby tele wood inlaid neck
23
Acoustics
new Eastman acoustic
Sigma dm3 dread x2 (his and hers)
Fender 12 str
Ibanez exotic wood
Silvercreek rosewood 00
Ovation steel str
martin backpacker acoustic
Johnson dobro
For 20 years I used a super thin nylon but as I got better i went up to 50 the 60 or 70. I like 1.0 slot. I better as i bought 200 of them. But .8 can work ok for me. I've experimented with 2.0 or metal even and I suspect I could move to that size but it would take some
relearning. I also use a lot of credit card pics with my pick punch. They are a little thin for me as most are around .60 or .75 but they are ok.
I found as i sped up (and I'm still not very fast) the thin pick was too floppy and it slowed me down. Is there anyone more to the sheedy side speedwise that used a thin?
relearning. I also use a lot of credit card pics with my pick punch. They are a little thin for me as most are around .60 or .75 but they are ok.
I found as i sped up (and I'm still not very fast) the thin pick was too floppy and it slowed me down. Is there anyone more to the sheedy side speedwise that used a thin?
- Partscaster
- Reactions:
- Posts: 1557
- Joined: Thu May 28, 2020 12:41 pm
- Location: Mars: Sector 6
Clayton Acetyl big rounded triangle .80 mm
"The man that hath no music in himself, nor is not moved with concord of sweet sounds, is fit for treasons, stratagems, and spoils. The motions of his spirit are dull as night, and his affections dark as Erebus. Let no such man be trusted."
- howardlo65
- Reactions:
- Posts: 51
- Joined: Sun May 31, 2020 8:24 am
- Location: NW Indiana
- Gearlist: Too many to list!
Couldn't vote in the poll because mine is not listed and is not ridiculous. Dunlop Prime Tone 1.5 mm for electrics, Dunlop Triangular Ultex 1.0 mm for acoustics.
Another Agile Guitar Forum refugee
If only my playing level reflected my 60+ years of playing!
If only my playing level reflected my 60+ years of playing!
- Rollin Hand
- Reactions:
- Posts: 1444
- Joined: Wed May 27, 2020 1:38 pm
Fender heavy is my preference these days. For acoustic I like the white Dunlop nylon thins.
That said, during my shred days, I liked Fender thin. A lot. I kept breaking the tips of the picks though. Maybe I should try those again....
That said, during my shred days, I liked Fender thin. A lot. I kept breaking the tips of the picks though. Maybe I should try those again....
"I'm not a sore loser. It's just that I prefer to win, and when I don't, I get furious."
- Ron Swanson
- Ron Swanson
Yeah I think those fender thins are 0.5. Doesn't take me but a quick second to crack those, and also haven't re-tried in years.Rollin Hand wrote: ↑Sun Jul 19, 2020 9:49 am Fender heavy is my preference these days. For acoustic I like the white Dunlop nylon thins.
That said, during my shred days, I liked Fender thin. A lot. I kept breaking the tips of the picks though. Maybe I should try those again....
I did use ULTRA thin (like 0.15) brass picks for a while. It does give you a ripping tone, but it's hard to track in the studio comes off thin and it literally eats holes in your strings.
Hahaha thanks Howard. IMO 1.5 is firmly in the ridiculous camp, no negative connotations intendedhowardlo65 wrote: ↑Sun Jul 19, 2020 9:44 am Couldn't vote in the poll because mine is not listed and is not ridiculous. Dunlop Prime Tone 1.5 mm for electrics, Dunlop Triangular Ultex 1.0 mm for acoustics.
- mikesr1963
- Reactions:
- Posts: 65
- Joined: Wed May 27, 2020 10:12 pm
I use .38 mm to 4.0 mm picks and whatever is in between.
Also did the V picks thing for a while. I quite liked them at the time, but the thickness kind of hurts my thumb after a while. Also they make that CHIRP CHIRP sound every time the pick touches a string.mikesr1963 wrote: ↑Sun Jul 19, 2020 1:19 pm I use .38 mm to 4.0 mm picks and whatever is in between.
That was also back when I was messing with a Parker Fly. The steel frets also go PLINK PLINK every time a string touches one. So combined with a V pick, every single note was CHIRPLINKRIIIIIIIING.
- mikesr1963
- Reactions:
- Posts: 65
- Joined: Wed May 27, 2020 10:12 pm
I hear people say they get a chirp but I only get a chirp when I try to get a chirp. I have all sizes with both the polished and frosted edges.PsychoCid wrote: ↑Sun Jul 19, 2020 1:21 pmAlso did the V picks thing for a while. I quite liked them at the time, but the thickness kind of hurts my thumb after a while. Also they make that CHIRP CHIRP sound every time the pick touches a string.mikesr1963 wrote: ↑Sun Jul 19, 2020 1:19 pm I use .38 mm to 4.0 mm picks and whatever is in between.
That was also back when I was messing with a Parker Fly. The steel frets also go PLINK PLINK every time a string touches one. So combined with a V pick, every single note was CHIRPLINKRIIIIIIIING.
As far as I recall there's no chirp from flat picking. My pick is almost always at an angle though, so I got more chirps than notmikesr1963 wrote: ↑Sun Jul 19, 2020 2:42 pmI hear people say they get a chirp but I only get a chirp when I try to get a chirp. I have all sizes with both the polished and frosted edges.PsychoCid wrote: ↑Sun Jul 19, 2020 1:21 pmAlso did the V picks thing for a while. I quite liked them at the time, but the thickness kind of hurts my thumb after a while. Also they make that CHIRP CHIRP sound every time the pick touches a string.mikesr1963 wrote: ↑Sun Jul 19, 2020 1:19 pm I use .38 mm to 4.0 mm picks and whatever is in between.
That was also back when I was messing with a Parker Fly. The steel frets also go PLINK PLINK every time a string touches one. So combined with a V pick, every single note was CHIRPLINKRIIIIIIIING.
- t100d
- Reactions:
- Posts: 162
- Joined: Wed May 27, 2020 8:39 pm
- Location: Bainbridge Island, WA
- Gearlist: '62 Guild T100D Slim Jim
'76 Ibanez 2405 Custom Agent
2004 Ibanez SA220EX
2009 Douglas WNO 630
2019 Peavey JF1
2021 Indio Retro Tele
'70 Gianninni Craviola
Córdoba Mini II EB-CE
Aria A542F
Takamine TC132SC
Rivera BC-394C
'70's Hohner PJ fretless bass
'84 Ibanez Roadstar II bass w/ SX Ursa neck
YouRock Midi guitar
Fender Acoustasonic 40
Fender Mustang III
Vox DA5
Monoprice 40W SS w/ 10" speaker
Dunlop Big Stubbies, with Monster Grips on both sides—I put a 1.00 (red), a 2.00 (middling blue-ish) and a 3.00 (purple) on my music stand along with my iPad and my Kindle Fire (with Remuda app to run Mustang III).
That way I'm covered for whatever guitars I take to the gig and whatever style of tune gets called. I primarily use the 1.00 for strumming.
That way I'm covered for whatever guitars I take to the gig and whatever style of tune gets called. I primarily use the 1.00 for strumming.
"Anyone who understands jazz knows that you can't understand it. It's too complicated. That's what's so simple about it."
Ridiculous maybe but I have some of those prime time picks too and they're niiiiiice.....PsychoCid wrote: ↑Sun Jul 19, 2020 10:05 amHahaha thanks Howard. IMO 1.5 is firmly in the ridiculous camp, no negative connotations intendedhowardlo65 wrote: ↑Sun Jul 19, 2020 9:44 am Couldn't vote in the poll because mine is not listed and is not ridiculous. Dunlop Prime Tone 1.5 mm for electrics, Dunlop Triangular Ultex 1.0 mm for acoustics.
I've tried sooo many picks over 30 years of playing including V-Picks, Gravity, wood, metal, all shapes, all sizes, all thicknesses, and even those monster thick suckers... I've settled on standard Fender sized Planet Waves Cortex picks 1 - 1.5 mm. They feel the best, sound the best and last the longest for me anyhow.
I actually liked v-picks but I'd wear a notch in one after playing just one set at a gig. My picking motion just destroys those types of picks (same with Gravity).
I actually liked v-picks but I'd wear a notch in one after playing just one set at a gig. My picking motion just destroys those types of picks (same with Gravity).