Unveiling the Frankenpeavey!

Show members what you're up to! Get tips, tricks and advice.
Post Reply
User avatar
glasshand
Reactions:
Posts: 785
Joined: Fri Jun 12, 2020 10:53 am
Location: NYC, the center of the universe
Contact:

Finally! Years ago I started to get the itch for a hybrid superstrat kind of thing. Strat body shape, humbucker. Single humbucker, because I wanted a stripped-down rocker. Tremolo, but not a Floyd (too fiddly, IMO) or a traditional Strat trem (doesn't hold tune well, IME). I looked around at a few options, and then at about the same time, a Peavey Nitro body and an Impact neck popped up on the market for good prices. The neck and body are compatible - same scale, same pocket. (Same factory, probably.) And so a plan was born...the Frankenpeavey!

I went with a Wilkinson/Gotoh VS100N for the bridge, Hipshot open-gear tuners, and a Railhammer Hyper Vintage humbucker. The pickup was not what I'd originally been envisioning, but someone offered it to me when I mentioned this project, and unfortunately that exchange is now lost to the old site, so I don't remember who it was, but after looking at the specs and listening to some samples I decided to go with it! I went with a stacked pot for volume and tone because I didn't want a bunch of controls cluttering up an otherwise very clean-looking body.

The body was originally routed for a Kahler, and it was adaptable to the Gotoh with only minimal woodwork to put in the new studs and enlarge the tremolo rout a touch on one side. I wanted to go with white, and fortunately the neck was already white, so I decided to leave that mostly alone. The body was red, but it stripped easily enough with a heat gun.

The body finish is Montana Gold "shock white" in satin. I wanted white white, not "vintage white"! I don't have any other satin-finish guitars so I thought, what the hell. Plus you don't have to polish it!

The artwork is based around a positive of a Lancaster bomber silhouette. It's kind of a tribute to a famous album... My friend Patti helped me by making a Cricut vinyl cutout from an SVG of the silhouette, and after the body paint was dry, I put the vinyl on the body, and carefully set to work with acrylic paint and a bunch of squeeze bottles and little spray pumps. The painting was all done "live", and it was the most nerve-racking part of the whole process, because spraying acrylic by hand is not the most predictable technique. I wanted that wild, anarchic unpredictable feeling, but doing it that way also means if you screw up there is nothing you can do but keep going, and if you screw up badly there is nothing you can do but sand the whole thing back, repaint, and try again. In the end I'm fairly happy with how it came out even though it's not exactly how I'd envisioned it. There's some texture to the acrylic, which is an interesting contrast to the satin body. Finally I covered the whole thing in Montana varnish.

What else...I wired the tone control "Peavey/Rhodes" style, because I like the possibilities offered by the "adjustable split" kind of thing it offers. The strap was made by my wife out of some fabric she made a friend a bowling shirt with! (Yes, the strap is "backwards", but it photographs better this way. We'll be reversing it.) And, of course, it's held on by Well-Hung Pro-Pins! I would not bother using anything else on a build.

On to the pictures!
frankenpeavey-1.jpg
frankenpeavey-2.jpg
frankenpeavey-3.jpg
User avatar
glasshand
Reactions:
Posts: 785
Joined: Fri Jun 12, 2020 10:53 am
Location: NYC, the center of the universe
Contact:

frankenpeavey-4.jpg
frankenpeavey-5.jpg
frankenpeavey-6.jpg
User avatar
glasshand
Reactions:
Posts: 785
Joined: Fri Jun 12, 2020 10:53 am
Location: NYC, the center of the universe
Contact:

Lessons learned:

Dry fit, dry fit, dry fit. Then sleep on it, look at your work closely, then dry fit again.

Also, when you practice techniques you're not sure of and then do them for real, DO THEM EXACTLY LIKE YOU PRACTICED. Don't ever say, "But this is really close to what I practiced, I'm sure it will come out the same," BECAUSE IT WON'T. Part of what made the spatter painting so difficult was my failure to adhere strictly to that. Stupid little things will come back to bite you like spray bottle B having a different spray pattern from seemingly-identical spray bottle A, or one lot of paint not having the same thickness as another.

And don't beat yourself up too much about the little stuff. :mrgreen:
User avatar
UrenragK
Reactions:
Posts: 782
Joined: Fri May 29, 2020 9:31 am
Location: Yoo Kay
Contact:

Outstanding!!!
User avatar
glasshand
Reactions:
Posts: 785
Joined: Fri Jun 12, 2020 10:53 am
Location: NYC, the center of the universe
Contact:

Oh yeah, and I don't have a truss rod cover because Peavey used a weird style on these and I haven't found one I like at a reasonable price. Maybe I'll get around to fabricating one some time.

I also don't have a neck plate, because again, Peavey used a weird nonstandard size, and I'm not paying somebody $50 for a small metal plate. I used ferrules and washers instead, and they work fine. :P
User avatar
ID10t
Reactions:
Posts: 493
Joined: Wed May 27, 2020 2:05 pm
Location: SE AZ

I don't generally care for white guitars, but that has a lot going for it. That is attractive and I like everything you did the way you wanted even if I truly don't understand all of the words.
I hope it plays well and you enjoy it.
User avatar
redman
Reactions:
Posts: 783
Joined: Wed May 27, 2020 3:22 pm
Location: Asheville, NC
Gearlist: Gibson LP, Agile PS900, SX Tele, SX Strat, PRS SE Zach Myers Yamaha FGX830c, Yamaha LL16, Yamaha LL26, Eastman E10D, Tobias Bass, Squire CV 60's P Bass

Nice work.
User avatar
andrewsrea
Reactions:
Posts: 1468
Joined: Wed May 27, 2020 4:43 pm
Location: Lake Saint Louis, MO
Gearlist: 28 Guitars: (2) basses, (2) acoustics, (3) hollow bodies, (3) Semi hollow, (1) Double-neck, (17) Solid-bodies

Turned out really nice!!!
Live life to the fullest! - Rob
User avatar
zisme
Reactions:
Posts: 272
Joined: Wed May 27, 2020 1:49 pm
Location: Norfolk, VA

well done! very cool
frogs love to eat flies,
the devil's name, Beelzebub, lord of the flies
evil spirits love to spiritually feed upon those whom Beelzebub rules

joined AGF March 20, 2013
User avatar
Partscaster
Reactions:
Posts: 1557
Joined: Thu May 28, 2020 12:41 pm
Location: Mars: Sector 6

Looks excellent.
I think the pickup sound clips sound good and fitting with the guitar.
"The man that hath no music in himself, nor is not moved with concord of sweet sounds, is fit for treasons, stratagems, and spoils. The motions of his spirit are dull as night, and his affections dark as Erebus. Let no such man be trusted."
User avatar
TVvoodoo
Reactions:
Posts: 495
Joined: Wed May 27, 2020 11:56 am
Location: Sasquatchewan
Contact:

Jeeeez that is so cool. Like flak spraying all around that bomber, so chaotic. Great job, and I especially like some of the hardware choices LOL!
Endless source of eye-rolling dad jokes, aspiring empty-nester, custom strap-maker https://reverb.com/ca/shop/well-hung-guitar-accessories
Post Reply