My shed studio build thread

Discuss your Recording Environment, OS, DAW and Hardware with members.
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

A different kind of build thread.. I'll try and add more as I go.
Now that I'll be taking a hiatus from pickup making I should get more done on this. These first few posts is what I've accomplished in the last year or so.

I've always wanted a separate studio space I could play guitar or drums in so I started this back in late 2019.
I first had to clear a little space in the woods. I own about an acre of woods so I wanted to use a littlebit of that space instead of using a big spot in my backyard.
20190605_173513.jpg
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

Then I added in some material and did a rough level. I had to hand chop all that wood. I did have someone help take out a few stumps though.
20190729_192738.jpg
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

Now that I have a rough level, it was time to set some posts in 2' of concrete. I didn't want this sitting on the ground so its roughly gonna be 2' off the ground. I wanted space to get under it easily to insulate as well.
6x6 posts. Shed is going to be 14x32
20191002_132914.jpg
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

I unfortunately didn't have the time to build it myself so I hired someone and only got a few pics during the process as I was working.


Leveling the posts and placing the runners then floor joists.
20191003_101749.jpg


1st wall going up
20191003_113727.jpg


Inside, when finished. Got a lot of work to do.
20191003_181350.jpg
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

Outside. The barn style door ain't gonna cut it so I'll be replacing that first. I also need to add a hand rail.
20191007_175854.jpg

Door replaced and hand rail added. Also made a new bridge to cross the ditch.
20191105_171550.jpg
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

Electricity.
Pain in the arse. I had to dig 18" down and it was about a 100' run from my house to the bridge.
20200607_162037.jpg
User avatar
ILuvTeles
Reactions:
Posts: 245
Joined: Thu May 28, 2020 10:48 am

Looks good! Door will work much better, too.
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

I need to take some more pics of the inside but as far as the outside I have tyvek up and will add siding hopefully this spring.
Inside I've insulated the first floor and have all my outlets installed. I'm using safe and sound rockwool insulation and I got 60 sheets of 5/8" drywall ready to go up too.
For a/c heat I have an 18k btu mini split that I need to install.

I just finished putting in the floor joists for the 2nd floor.
I'll get some pics of this and of the inside next time I'm out there.
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

ILuvTeles wrote: Sun Feb 07, 2021 1:18 pm Looks good! Door will work much better, too.
I figured trying to get a barn style door to keep sound inside was gonna be tough!
User avatar
ID10t
Reactions:
Posts: 493
Joined: Wed May 27, 2020 2:05 pm
Location: SE AZ

Looks nice. For that size (easier than messing with a house) I would consider dedicated grounds to each circuit. Make sure you use florescent lights (I kid).
User avatar
Flatline
Reactions:
Posts: 330
Joined: Wed May 27, 2020 4:38 pm
Location: Indiana

That looks great! I built a new shed last year, but much smaller and more for general storage. It is nice to be able to get some crap out of the house. Your studio shed looks awesome!
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

ID10t wrote: Sun Feb 07, 2021 1:33 pm Looks nice. For that size (easier than messing with a house) I would consider dedicated grounds to each circuit. Make sure you use florescent lights (I kid).
Yep.
I ran 220 from my house, 60A total new breaker from my house and divided the shed into 3 20A circuits. 1 for each long wall and 1 dedicated for the a/c.
A new ground was driven into the ground for the entire circuit.
User avatar
aullucci
Reactions:
Posts: 343
Joined: Wed May 27, 2020 2:17 pm
Location: Lil Rhody

What a payoff that is going to be! Great work, man
User avatar
fatjack
Reactions:
Posts: 418
Joined: Thu May 28, 2020 10:14 am
Location: chucktown SC

Look like a great place once it's finished. I think most of us would like a shed like that.
User avatar
nomadh
Reactions:
Posts: 1718
Joined: Wed May 27, 2020 1:32 pm
Gearlist: My Gear:Electric
Gibson '13 studio dlx hsb
Gibson '79 flying V
Gibson '06 sg faded
Gibson '15 LP CM w gforce
Epiphone Casino coupe
Epiphone dot studio
Fender USA strat w mjt body _w Original body 81
Fender lead II
Firefly spalted 338
Squier affinity tele bsb
Squier strat std relic
Squier subsonic baritone
Agile al2500 albino
Agile al3001 hsb
Sx ash Ltd strat
Sx ash strat short scale
Sx ash tele
Sx callisto jr
Dean vendetta
Washburn firebird. Ps10
Johnson trans red strat
Johnson jazz box Vegas
Seville explorer
Inlaid tele
flametop bigsby tele wood inlaid neck
23

Acoustics
new Eastman acoustic
Sigma dm3 dread x2 (his and hers)
Fender 12 str
Ibanez exotic wood
Silvercreek rosewood 00
Ovation steel str
martin backpacker acoustic
Johnson dobro

Buddha Pickups wrote: Sun Feb 07, 2021 1:18 pm Electricity.
Pain in the arse. I had to dig 18" down and it was about a 100' run from my house to the bridge.

20200607_162037.jpg
Beats my extension cords run on the ground through puddles. :) very pro.
User avatar
uwmcscott
Reactions:
Posts: 1448
Joined: Wed May 27, 2020 1:45 pm
Location: Northern Wisco
Gearlist: A few LP's, a Strat, a Tele and a few acoustics.

Very cool - now that I'm working at home I definitely need something like that.
AGF Survivor Champ Emeritus (Ask TVVoodoo )
User avatar
Mossman
Reactions:
Posts: 1783
Joined: Wed May 27, 2020 1:46 pm

Very impressive!
Finally escaping the People's Republic of Kalifornia!

BANNED BY MOMO
User avatar
Longblacktie
Reactions:
Posts: 74
Joined: Wed May 27, 2020 10:35 pm

That is awesome! Is it going to have heat?
User avatar
LightWingStudios
Site Admin
Reactions:
Posts: 999
Joined: Wed May 27, 2020 11:34 am
Location: Titusville, FL U.S. of A.
Contact:

MAJOR Congrats! "Shed Studios" is BORN! :)
U.S. Manufacturer Of Musical Instrument Protection Accessories: AxeShield HD, AxeSak HD, AmpShield HD, KeyShield HD, PedalShield HD, MixShield HD, AxeGlove And AxeCap.

Visit Us At https://www.LightWingStudios.com

Email us at contact@LightWingStudios.com
devdem
Reactions:
Posts: 91
Joined: Wed May 27, 2020 11:47 pm

Incredible. I'm so jealous of you guys with the space. At some point over the next few years we will move and I'll find someplace with an acre or two and build a workshop/music shed. Heck even my work-from-home desk is tucked in a little spare bedroom nook.

Well done, keep the pictures coming.
User avatar
Partscaster
Reactions:
Posts: 1543
Joined: Thu May 28, 2020 12:41 pm
Location: Mars: Sector 6

The sheetrock can be put up with a sound deadening caulking compound gooped up each stud, called Green Glue. It's effective. There are videos about using it.
"The man that hath no music in himself, nor is not moved with concord of sweet sounds, is fit for treasons, stratagems, and spoils. The motions of his spirit are dull as night, and his affections dark as Erebus. Let no such man be trusted."
User avatar
nomadh
Reactions:
Posts: 1718
Joined: Wed May 27, 2020 1:32 pm
Gearlist: My Gear:Electric
Gibson '13 studio dlx hsb
Gibson '79 flying V
Gibson '06 sg faded
Gibson '15 LP CM w gforce
Epiphone Casino coupe
Epiphone dot studio
Fender USA strat w mjt body _w Original body 81
Fender lead II
Firefly spalted 338
Squier affinity tele bsb
Squier strat std relic
Squier subsonic baritone
Agile al2500 albino
Agile al3001 hsb
Sx ash Ltd strat
Sx ash strat short scale
Sx ash tele
Sx callisto jr
Dean vendetta
Washburn firebird. Ps10
Johnson trans red strat
Johnson jazz box Vegas
Seville explorer
Inlaid tele
flametop bigsby tele wood inlaid neck
23

Acoustics
new Eastman acoustic
Sigma dm3 dread x2 (his and hers)
Fender 12 str
Ibanez exotic wood
Silvercreek rosewood 00
Ovation steel str
martin backpacker acoustic
Johnson dobro

Partscaster wrote: Mon Feb 08, 2021 6:26 pm The sheetrock can be put up with a sound deadening caulking compound gooped up each stud, called Green Glue. It's effective. There are videos about using it.
I've heard a bit about this. I find it very hard to believe you need glue to keep the sound from escaping tightly screwed drywall. Is it really that important?
User avatar
TVvoodoo
Reactions:
Posts: 482
Joined: Wed May 27, 2020 11:56 am
Location: Sasquatchewan
Contact:

Such a beautiful natural setting? no windows?
Endless source of eye-rolling dad jokes, aspiring empty-nester, custom strap-maker https://reverb.com/ca/shop/well-hung-guitar-accessories
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

Longblacktie wrote: Sun Feb 07, 2021 11:19 pm That is awesome! Is it going to have heat?
Yes, I have an 18k btu mini split and a dedicated 220 circuit for it all wired up. Just need to install it.
Buddha Pickups
Reactions:
Posts: 411
Joined: Fri May 29, 2020 6:13 pm

Partscaster wrote: Mon Feb 08, 2021 6:26 pm The sheetrock can be put up with a sound deadening caulking compound gooped up each stud, called Green Glue. It's effective. There are videos about using it.
I read that as well but it's pretty costly.
I have 3 solutions so far for sound deadening.

1st. I bought 5/8" drywall and enough to put 2 layers on the walls. Standard is 1/2" so im banking on more mass to help.
2nd. I'm using rockwool safe and sound insulation. Much better than fiberglass insulation for sound deadening purposes.
3rd. I've added a layer of moving blankets over the insulation, stapled to the studs. This should add another layer of sound protection while also adding a buffer between the drywall and the studs, similar to what green glue does.
Post Reply